Traveling with a film camera introduces a problem that digital photographers never have to think about: airport scanners.
Photographic film is sensitive to more than visible light. The X-rays used to inspect luggage can also expose film, potentially causing fogging, loss of contrast, color changes, or other damage that you won't discover until after the roll is developed.
For years, the usual advice was fairly simple. Keep your film in your carry-on, don't worry too much about lower ISO film, and avoid putting faster film through airport X-ray machines.
That advice has become less reliable with new updates that the TSA is pushing.
More airports are now using CT scanners for carry-on luggage, and these newer machines can damage film that photographers previously would have considered safe to send through airport security. Recent TSA deployment has put CT scanners into hundreds of U.S. airports, so this isn't something you're only likely to encounter at a handful of major hubs anymore.
Fortunately, protecting your film is pretty simple once you know what to do.
The Short Answer: Can Film Go Through Airport Security?
You can absolutely travel through airport security with photographic film.
The safest approach is to keep all undeveloped film in your carry-on luggage and ask for a hand inspection at security rather than allowing the film to go through the luggage scanner.
The TSA specifically recommends carrying undeveloped film and cameras containing undeveloped film to the checkpoint and asking for a hand inspection.This applies to fresh film you haven't shot yet and rolls you've already finished but haven't had developed.
And whatever you do, don't put undeveloped film in your checked suitcase!
Why Can Airport Scanners Damage Film?
Film works because its emulsion contains light-sensitive materials that react to exposure.
Normally, the exposure we care about happens when you press your camera's shutter button. Light travels through the lens, reaches the film for a carefully controlled amount of time, and creates a latent image that will become visible during developing.
X-rays are another form of electromagnetic radiation, and photographic film can respond to them too.
If airport screening equipment exposes the film to enough radiation, it can create unwanted density or fog on the negative. You won't see the damage by looking at the film canister afterward. The problem becomes visible once the film is developed and scanned.
Depending on the film and the amount of scanner exposure, you may see fogging, reduced shadow detail, unusual bands, lower contrast, or other changes to the image. Kodak's testing of Portra 400 through a CT carry-on scanner found visible fogging after just one scan, which is why the type of airport scanner matters.
Traditional X-Ray Scanners vs. CT Scanners
This is where a lot of older film-travel advice gets confusing because of the recent changes to airport security.
Airport carry-on screening has traditionally used conventional X-ray machines. You've probably heard advice that slower film, particularly film below ISO 800, can safely pass through these scanners. That advice came from a time when the type of scanner at a carry-on checkpoint was relatively predictable.
Modern airports are increasingly replacing or supplementing those machines with computed tomography, or CT, scanners. Instead of creating a conventional two-dimensional X-ray image, CT systems generate detailed three-dimensional views of a bag's contents. TSA has been steadily expanding this technology across U.S. airports.
That's great for airport security, but it's not particularly great for your film.
Kodak tested Portra 400 by passing it through one of the newer CT systems and subsequently having the film evaluated by Eastman Kodak researchers. The company reported significant fogging after a single scan and recommended keeping unprocessed photographic film of any speed out of CT scanners.
So while you may still encounter advice saying that ISO 100, 200, or 400 film is safe at airport security, that answer is incomplete unless you know what kind of scanner is being used.
For practical purposes, we think there's a much easier rule:
If the film hasn't been developed yet, ask for a hand check.
That way you don't need to identify the scanner or remember an ISO cutoff while you're standing in the security line.
What About ISO 100 or ISO 200 Film?
Lower-speed film is generally less sensitive to scanner exposure than faster film, but that doesn't mean it is immune to CT scanners. Kodak's recommendation following its CT testing was to keep unprocessed film of any speed out of those scanners.
If you're carrying Kodak Gold 200, for example, we wouldn't intentionally send it through a CT scanner just because its box speed is relatively low. The same simple rule works here: if it's undeveloped, request a hand check.
Can Exposed Film Go Through Airport Security?
Taking photographs on the roll does not eliminate the scanner concern.
After you expose a frame in your camera, the image exists as a latent image in the film's emulsion. It still has to be chemically developed before that image becomes stable. That means a finished roll sitting inside its canister is still unprocessed film.
Kodak's CT guidance specifically warns about both unexposed film and film that has already been exposed but has not yet been processed. So if you shoot five rolls on vacation and fly home with them, protect those finished rolls just like you protected the fresh ones on your outbound flight.
Once conventional photographic film has been developed, the scanner concern we're discussing here no longer applies in the same way. The light-sensitive chemistry has already been processed and the image is permanent.
If you want a deeper explanation of what actually happens during that process, our How Does Film Developing Work? guide walks through the journey from latent image to finished negative.
Never Put Undeveloped Film in Checked Luggage
If you remember only two things from this article, remember these:
Keep undeveloped film in your carry-on. Ask for a hand check.
Checked baggage can be screened using much more powerful equipment, and you won't be standing there to request an alternative inspection. Kodak's guidance specifically recommends never shipping unprocessed film as checked airline luggage and instead keeping it with your carry-on belongings.
Even if you don't expect a problem from the carry-on checkpoint, putting your film in your checked suitcase is an unnecessary gamble, you definitely want to keep it with you.
How to Ask TSA to Hand Check Your Film
In the United States, this is pretty straightforward.
Before getting to the scanner, keep your film together somewhere you can easily reach it. A clear plastic bag works well because you can remove all of the rolls at once without digging through your camera bag.
When you reach the checkpoint, tell the TSA officer that you're carrying undeveloped photographic film and would like it hand inspected rather than sent through the scanner, you don't need an elaborate explanation.
The TSA itself recommends bringing undeveloped film to the checkpoint and requesting a hand inspection. Keeping the rolls out of cardboard packaging can also make the inspection easier, although there's no need to remove 35mm film from its light-tight canister.
Most importantly, give yourself some extra time. A hand inspection adds another step to the security process, so arriving at the airport with three minutes to spare isn't the ideal time to introduce your TSA agent to your vacation supply of Kodak Gold.
What If My Film Is Already Loaded in My Camera?
Film inside a camera is still film. The TSA's guidance specifically includes cameras containing undeveloped film among the items travelers can bring to the checkpoint for hand inspection.
Don't open the camera to remove a partially shot roll. Doing that can expose the film to light and damage the photographs you've already taken.
Instead, tell the officer that the camera contains undeveloped film and request that the camera itself be inspected by hand. This is also one reason it helps to know whether your camera is loaded before you leave for the airport. If you're carrying an empty camera, the camera body itself doesn't have the same film-sensitivity problem.
What About Disposable Cameras?
A disposable camera is basically a film camera that already has film loaded inside it, so the same basic rule applies. Don't assume the plastic camera body protects the film from X-rays. It doesn't.
Keep disposable cameras in your carry-on and ask for a hand inspection. The TSA's guidance covering cameras with undeveloped film applies here too. This is especially worth remembering because many disposable cameras contain relatively fast film.
What About Polaroid and Instant Film?
Instant film deserves similar caution. Polaroid recommends keeping its unexposed instant film in carry-on luggage and requesting a hand check rather than putting it through airport scanners. The company specifically warns that newer CT-style scanners can damage the film.
If you're traveling with unopened packs of instant film or a camera containing unexposed instant film, include them with the rest of the film you ask security to inspect manually.
What If I'm Traveling Internationally?
This is where things can get a little tricky. TSA guidance applies to security checkpoints in the United States. Other countries operate under their own aviation-security rules and procedures, and a manual inspection that is routine at one airport may be handled differently at another.
Kodak recommends contacting airport security in advance when traveling internationally with unprocessed film because manual inspection may not always be available.
If your trip involves several airports, research the film-inspection policy at each one before leaving. Remember that you may pass through security more than once during a trip, particularly when changing countries or making certain international connections.
This is another reason we prefer requesting hand inspection whenever possible rather than trying to calculate how many scanner passes a particular roll can tolerate.
Should I Use a Lead Film Bag?
Lead-lined film bags sound like an easy solution, but they aren't necessarily a substitute for a hand inspection.
The idea is simple: the shielding reduces the amount of X-ray radiation reaching the film. The problem is that airport security still needs to determine what's inside the bag.
Kodak notes that lead-lined bags can reduce X-ray exposure, but their effectiveness depends on factors including the shielding thickness, film speed, and the scanner itself. The bag may also trigger additional inspection if security equipment can't adequately see through it. For most travelers, carrying the film in an accessible clear bag and requesting a manual inspection is simpler.
My Film Already Went Through the Scanner. Is It Ruined?
Not necessarily.
If your film accidentally went through airport security, don't throw it away.
The amount of damage depends on the type of scanner, the film, its sensitivity, and potentially how many times it was scanned. Even Kodak's CT testing describes varying degrees of fogging rather than every roll simply becoming completely blank. You also can't reliably determine the extent of the damage by looking at the canister.
If the roll contains photographs you care about, the practical answer is to have it developed.
Airport scanner damage is different from a roll that never advanced through the camera, so don't assume that an airport scan automatically means you've lost every image. Once the negatives are developed, you'll have a much better idea of what survived.
If the roll comes back with an unexpected problem and you're trying to figure out what happened, our Why Did My Film Roll Come Back Blank? guide explains how the negatives themselves can provide clues about exposure, loading, camera, and processing problems.
Should I Develop My Film Before Flying Home?
If having film developed during your trip is convenient, processing it before another flight removes the concern of carrying exposed-but-undeveloped conventional film through another airport scanner.
But we wouldn't choose an unfamiliar lab purely because you're afraid to fly home with your film.
Keeping your rolls in your carry-on and requesting a hand inspection is a perfectly reasonable approach when that inspection is available. If you'd rather wait until you're home, that's fine.
BG Film Lab accepts film by mail for developing and high-resolution scanning, so once your rolls have safely made the trip home, you can send them to us for processing. Our developing orders include our five-business-day scan turnaround guarantee. You can also see our step-by-step guide to sending film to BG Film Lab.
If you're planning to wait until you return home to develop your photographs, our guide to storing exposed film explains what to do with your finished rolls in the meantime.
The Easiest Way to Fly With Film
Airport security doesn't have to keep you from bringing a film camera on vacation. The scanner technology has changed, but the safest routine is actually easier to remember than all of the different ISO rules:
Keep undeveloped film out of your checked luggage. Keep it accessible in your carry-on. Request a hand inspection at the security checkpoint whenever possible.
Do that for fresh rolls, finished-but-undeveloped rolls, loaded cameras, and disposable cameras. Then you can spend the rest of your trip worrying about something more important, like whether bringing six rolls for a three-day weekend was enough.